ABB AC500 PLC - Group Parameters for the Analog Part; Channel Parameters for the Analog Inputs (4 x)

Group Parameters for the Analog Part
Name Value Internal value Internal value,
type
Default
Analog data
format
Standard
Reserved
0
255
BYTE 0
Behaviour AO at
comm. error *)
Off
Last value
Last value 5 s
Last value 10 s
Substitute value
Substitute value
5 s
Substitute value
10 s
0
1
6
11
2
7
12
BYTE 0
*) The parameter Behaviour AO at comm. error is only analyzed if the Failsafe-mode is ON.
Channel Parameters for the Analog Inputs (4x)
Name Value Internal value Internal value,
type
Default
Input 0, Channel
configuration
Table Operating
modes of the
analog inputs
Ä Table 142 “Ch
annel Configura-
tion”
on page 900
Table Operating
modes of the
analog inputs
Ä Table 142 “Ch
annel Configura-
tion”
on page 900
BYTE 0
Input 0, Check
channel
Table Channel
montoring
Ä Table 143 “Ch
annel Monitoring”
on page 900
Table Channel
montoring
Ä Table 143 “Ch
annel Monitoring”
on page 900
BYTE 0
: : : : :
: : : : :
Input 3, Channel
configuration
Table Operating
modes of the
analog inputs
Ä Table 142 “Ch
annel Configura-
tion”
on page 900
Table Operating
modes of the
analog inputs
Ä Table 142 “Ch
annel Configura-
tion”
on page 900
BYTE 0
Input 3, Check
channel
Table Channel
montoring
Ä Table 143 “Ch
annel Monitoring”
on page 900
Table Channel
montoring
Ä Table 143 “Ch
annel Monitoring”
on page 900
BYTE 0
Device Specifications
Communication Interface Modules (S500) > Modbus
2019/04/17 3ADR010121, 13, en_US 899