The Pluggable Marker Holder is used to hold 4 marking stripes, on which the meaning of the I/O
channels of I/O modules can be written down. The holder is transparent so that after snapping it
onto the module the LEDs shine through.
The marking stripes can be printed out from TA563.doc
http://new.abb.com/products/ABB1SAP180500R0001.
Parameter Value
Use For labelling channels of I/O modules
Mounting Snap-on to the module
Weight 20 g
Dimensions 82 mm x 67 mm x 13 mm
Part No. Description Product Life Cycle Phase *)
1SAP 180 500 R0001 TA523, Pluggable Marker
Holder (10 pieces)
Active
*) For planning and commissioning of new installations use modules in Active
status only.
1.8.4.4 TA525 - Plastic Markers
Accessory to label AC500 and S500 modules.
Purpose
Handling
Instructions
Technical Data
Ordering Data
2019/04/173ADR010121, 13, en_US1170
To Next Page
Loading...
