WARNING!
Risk of electric shock!
With an opened option cover, energized parts of the processor module could be
touched.
– Always turn off and disconnect the power supply for the processor module
before you open the option cover.
– Make sure that the option cover is closed before reconnecting the processor
module to the power supply.
Insertion/removal of the adaptor is also described in the installation instruction for TA561-RTC.
See
https://new.abb.com/products/ABB1SAP181400R0001 or use the QR code.
The option cover is available as a spare part (see TA570 spare part set for AC500-eCo pro-
cessor modules
Ä
Chapter 2.5.5.12 “TA570 - Spare Part Set” on page 1247).
Part No. Description Product Life Cycle Phase *)
1SAP 186 400 R0001 TA569-RS-ISO, serial RS-485
isolated adaptor for PM55x/
PM56x
Active
*) For planning and commissioning of new installations use modules in Active
status only.
2.5.5.6 TA562-RS-RTC - Adaptor with Serial RS-485 (COM2) and Real-time Clock
The TA562-RS-RTC serial RS-485 and real-time clock adaptor is used for equipping AC500-
eCo processor modules with a real-time clock and a second serial RS-485 interface COM2.
The real time clock can be buffered via an optional standard lithium battery (CR2032) during
power supply failures (see lithium battery for real-time clock of AC500-eCo processor modules
Ä
Chapter 2.5.5.7 “CR2032 - Battery for Real-Time Clock” on page 1240).
Insertion/
Removal of the
Adapter
Ordering Data
Intended Pur-
pose
System Assembly, Construction and Connection
AC500-eCo > Handling of Accessories
2019/04/17 3ADR010121, 13, en_US 1233
To Next Page
Loading...
