1.7.5.2.11 Ordering Data
Part No. Description Product Life Cycle Phase *)
1SAP 224 200 R0001 CI542-DP, PROFIBUS DP bus module,
8 DI, 8 DO and 8 DC
Active
1SAP 424 200 R0001 CI542-DP-XC, PROFIBUS DP bus
module, 8 DI, 8 DO and 8 DC,
XC version
Active
*) For planning and commissioning of new installations use modules in Active
status only.
1.7.6 PROFINET
1.7.6.1 Comparison of the CIxyz-PNIO Modules
The PROFINET IO devices combine the advantages of decentralized I/O modules with the
reaction time of AC500 mounted central I/O modules. The devices for PROFINET provide the
extension -PNIO in the device name.
The Communication Module CM579-PNIO acts as IO Controller in a PROFINET network. It is
connected to the Processor Module via an internal communication bus. Depending on the Ter-
minal Base, several Communication Modules can be used for one Processor Module.
The Communication Interface Modules CIxyz-PNIO act as IO Devices in a PROFINET network.
Additionally the communication module CM589-PNIO(-4) can be used to setup a AC500 PLC to
act as IO Device in a PROFINET network.
The difference of the CIxyz-PNIO devices can be found in their input and output characteristics
Ä
Chapter 1.7.6.1.1.1 “Characteristics of CI50x-PNIO” on page 1004. The characteristics for
CM589-PNIO(-4) can be found in the device description for CM589-PNIO
Ä
Further information
on page 143.
1.7.6.1.1 PROFINET IO Devices CI50x-PNIO
Characteristics of CI50x-PNIO
Parameter Value
Bus connection 2 x RJ45
Switch Integrated
Technology Hilscher netX100
Transfer rate 10/100 Mbit/s (full-duplex)
Transfer method According to Ethernet II, IEE802.3
Ethernet 100 base-TX, internal switch, 2x RJ45 socket
Expandability Max. 10 S500 I/O modules
Adjusting elements 2 rotary switches for generation of an explicit
name
Communication Interface Modules (S500) > PROFINET
2019/04/173ADR010121, 13, en_US1004
To Next Page
Loading...
