Parameter Value
Terminals of the channels DI8 to DI15 Terminals 2.0 to 2.7
Reference potential for all inputs Terminals 1.9...3.9 (negative pole of the
supply voltage, signal name ZP)
Indication of the input signals 1 yellow LED per channel, the LED is ON
when the input signal is high (signal 1)
Monitoring point of input indicator LED is part of the input circuitry
Input type (according EN 61131-2) Type 1
Input delay (0->1 or 1->0) Typ. 0.1 ms, configurable from 0.1...32 ms
Input signal voltage 24 VDC
0-Signal -3 V...+5 V
Undefined Signal > +5 V...< +15 V
1-Signal +15 V...+30 V
Ripple with signal 0 Within -3 V...+5 V
Ripple with signal 1 Within +15 V...+30 V
Input current per channel
Input voltage +24 V Typ. 5 mA
Input voltage +5 V > 1 mA
Input voltage +15 V > 2 mA
Input voltage +30 V < 8 mA
Max. cable length
Shielded 1000 m
Unshielded 600 m
Technical Data of the Configurable Digital Inputs/Outputs
Each of the configurable digital I/O channels can be defined as input or output by the user pro-
gram. This is done by interrogating or allocating the corresponding channel.
Parameter Value
Number of channels per module 8 inputs/outputs (with transistors)
Distribution of the channels into groups 1 group for 8 channels
If the channels are used as inputs
Channels DC16...DC23 Terminals 4.0...4.7
If the channels are used as outputs
Channels DC16...DC23 Terminals 4.0...4.7
Indication of the input/output signals 1 yellow LED per channel, the LED is ON when
the input/output signal is high (signal 1)
Monitoring point of input/output indicator LED is part of the input circuitry
Galvanic isolation Yes, per module
I/O Modules > Digital/Analog I/O Modules
2019/04/17 3ADR010121, 13, en_US 597
To Next Page
Loading...
