ABB AC500 PLC - 1.2.2.2.7 Ordering Data

Parameter Value
LCD display Optional
Buttons and switches 1 button for Reset (Reserved)
1 Button (Reserved)
1 Switch for RUN/STOP
1.2.2.2.7 Ordering Data
Part No. Description Product Life Cycle
Phase *)
1SAP 155 500 R0279 PM595-4ETH-F, processor module,
user progr./data memory 16 MB / 16 MB,
1.3 GHz, 24 VDC, memory card slot,
interfaces 2x RS232-485, 2x independent
Ethernet interfaces (progr., web server,
IEC60870-5-104 protocols),
2x independent Ethernet based interfaces
with 2-port switch (between fieldbus
protocols PROFINET IO, EtherCAT and
Ethernet)
Active
1SAP 351 500 R0279 PM595-4ETH-M-XC, processor module,
user progr./data memory 16 MB / 16 MB,
1.0 GHz, 24 VDC, memory card slot,
interfaces 2x RS232-485, 2x independent
Ethernet interfaces (progr., web server,
IEC60870-5-104 protocols),
2x independent Ethernet based interfaces
with 2-port switch (between fieldbus
protocols PROFINET IO, EtherCAT and
Ethernet), XC version
Active
*) For planning and commissioning of new installations use modules in Active
status only.
Table 17: Accessories
Part No. Description
1SAP 182 700 R0001 TA541, lithium battery
1SAP 180 100 R0001 MC502, memory card
1SAP 180 200 R0001 TK501, programming cable D-sub / D-sub, length: 5 m
1SAP 180 200 R0101 TK502, programming cable terminal block / D-sub, length: 5 m
1TNE 968 901 R1100 TK503, programming cable USB / D-sub (RS-485), length 3 m
1SAP 182 300 R0001 TA535, protective caps for XC devices
1SAP 182 600 R0001 TA540, front cover as spare part (3 pieces)
1SAP 182 800 R0001 TA543, screw mounting accessory (20 pieces)
Device Specifications
Processor Modules > AC500 (Standard)
2019/04/17 3ADR010121, 13, en_US 91