AKD User Guide | DRV Parameters and Commands
DRV.READFORMAT
General Information
Type R/W Parameter
Description Sets the value returned to either decimal or hexadecimal.
Units N/A
Range 10 or 16
Default Value 10
Data Type Integer
See Also N/A
Start Version M_01-00-00-000
Description
DRV.READFORMAT sets the return values type to either decimal or hexadecimal.
Format Description
10 Sets the read values to decimal format
16 Sets the read values to hexadecimal format
386 Kollmorgen | December 2010
To Next Page
Loading...
