AKD User Guide | DOUT Parameters
DOUT1.STATE AND DOUT2.STATE
General Information
Type R/O Parameter
Description Reads the digital output state.
Units N/A
Range 0 to 1
Default Value N/A
Data Type Boolean
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus
202 DOUT1.STATE
212 DOUT2.STATE
M_01-03-00-000
Description
DOUT1.STATE and DOUT2.STATE read the state of one digital output according to the value stated in the com-
mand. These parameters can also be used to set a value of one digital output (only if the output mode is idle).
Related Topics
10.1.4 Digital Outputs
338 Kollmorgen | December 2010
To Next Page
Loading...
