Kollmorgen AKD series

MT.CONTINUE
General Information
Type Command
Description Continues a stopped motion task; active in opmode 2 (position) only.
Units N/A
Range N/A
Default Value 0
Data Type N/A
See Also
MT.NUM , MT.P, MT.V, MT.CNTL, MT.ACCMT.V, MT.DEC,
MT.TNUM, MT.MTNEXT MT.MTNEXT , MT.SET , MT.LOAD
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 534 M_01-03-00-000
Description
MT.CONTINUE continues a motion task that has been stopped by the DRV.STOP command.
Related Topics
12.2 Motion Tasks
AKD User Guide | MT Parameters and Commands
Kollmorgen | December 2010 519