Kollmorgen AKD series User Manual

AKD User Guide | FB1 Parameters
FB1.TRACKINGCAL
General Information
Type NV Parameter
Description Controls tracking calibration algorithm.
Units N/A
Range 0 to 1
Default Value 0
Data Type Integer
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 312 M_01-03-00-000
Description
This parameter turns the tracking calibration algorithm on or off for sine-cosine or resolver.
0 = Tracking calibration is off.
1 = Tracking calibration is on.
Related Topics
8.2 Feedback 1
416 Kollmorgen | December 2010

Kollmorgen AKD series Specifications

General

Continuous Current	Up to 180 A
Control Modes	Position, Velocity, Torque
Communication Interfaces	EtherCAT, CANopen, Modbus TCP/IP
Feedback Options	Resolver, Encoder
Safety Features	Safe Torque Off (STO), Safe Stop 1 (SS1)
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit, Overtemperature
Switching Frequency	8 kHz, 16 kHz
Ambient Temperature	0°C to 40°C
Operating Temperature	0 - 40 °C (derating may apply)
Humidity	5% to 95% non-condensing