MOTOR.VOLTMAX
General Information
Type NV Parameter
Description Sets the motor maximum voltage.
Units Vrms
Range 110 to 900 Vrms
Default Value 230 Vrms
Data Type Integer
See Also N/A
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE
and CANopen
3452h/0 M_01-00-00-000
Modbus 524 M_01-03-00-000
Description
This parameter sets the maximum permissible motor voltage. For instance, if a motor that is rated for a 400 V
supply is connected to the drive, then the MOTOR.VOLTMAX setting is 400. This value also sets regen resistor
and over voltage thresholds in the drive to acceptable values for the motor so that the motor windings are not
damaged.
AKD User Guide | MOTOR Parameters
Kollmorgen | December 2010 511
To Next Page
Loading...
