Kollmorgen AKD series User Manual

AKD User Guide | VBUS Parameters
VBUS Parameters
VBUS.OVFTHRESH
General Information
Type R/O Parameter
Description Reads the over voltage fault level.
Units Vdc
Range 0 to 900 Vdc
Default Value N/A
Data Type Integer
See Also VBUS.UVFTHRESH
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 794 M_01-03-00-000
Description
VBUS.OVFTHRESH reads the over voltage fault level for the DC bus.
This value is read from the drive EEPROM and varies according to the drive type.
Related Topics
7.2 Regeneration
614 Kollmorgen | December 2010

Kollmorgen AKD series Specifications

General

Continuous Current	Up to 180 A
Control Modes	Position, Velocity, Torque
Communication Interfaces	EtherCAT, CANopen, Modbus TCP/IP
Feedback Options	Resolver, Encoder
Safety Features	Safe Torque Off (STO), Safe Stop 1 (SS1)
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit, Overtemperature
Switching Frequency	8 kHz, 16 kHz
Ambient Temperature	0°C to 40°C
Operating Temperature	0 - 40 °C (derating may apply)
Humidity	5% to 95% non-condensing