Kollmorgen AKD series User Manual

VBUS.UVFTHRESH
General Information
Type R/W Parameter
Description Sets the under voltage fault level.
Units Vdc
Range 90 to 420 Vdc
Default Value 90 Vdc
Data Type Integer
See Also VBUS.OVFTHRESH
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 800 M_01-03-00-000
Description
VBUS.UVFTHRESH sets the undervoltage fault level of the DC bus.
The default value is read from the EEPROM, but can by modified by the user and stored on the NV RAM. This
value varies according to drive type.
Related Topics
7.2 Regeneration
AKD User Guide | VBUS Parameters
Kollmorgen | December 2010 617

Kollmorgen AKD series Specifications

General

Continuous Current	Up to 180 A
Control Modes	Position, Velocity, Torque
Communication Interfaces	EtherCAT, CANopen, Modbus TCP/IP
Feedback Options	Resolver, Encoder
Safety Features	Safe Torque Off (STO), Safe Stop 1 (SS1)
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit, Overtemperature
Switching Frequency	8 kHz, 16 kHz
Ambient Temperature	0°C to 40°C
Operating Temperature	0 - 40 °C (derating may apply)
Humidity	5% to 95% non-condensing