AKD User Guide | VL Parameters
VL.FBFILTER
General Information
Type R/O Parameter
Description Filters VL.FB value; active in opmodes 1 (velocity) and 2 (position) only.
Units
Depends on UNIT.VROTARY or UNIT.VLINEAR
Rotary: rpm, rps, deg/s, (PIN/POUT)/s, rad/s
Linear: counts/s, mm/s, µm/s, (PIN/POUT)/s
Range N/A
Default Value N/A
Data Type Float
See Also VL.FB
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
EtherCAT COE
and CANopen
3407h/1 M_01-00-00-000
Modbus 858 M_01-03-00-000
Description
This parameter returns the same value as VL.FB, filtered through a 10 Hz filter.
Related Topics
11.4 Velocity Loop
634 Kollmorgen | December 2010
To Next Page
Loading...
