Kollmorgen AKD series User Manual

VBUS.UVWTHRESH
General Information
Type NV Parameter
Description Sets voltage level for undervoltage warning.
Units Vdc
Range 0 to 900 Vdc
Default Value
10 volts above the default value of the under voltage fault threshold
(VBUS.UVFTHRESH). The default value of VBUS.UVFTHRESH is hard-
ware dependent.
Data Type U16
See Also VBUS.UVFTHRESH
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 804 M_01-03-00-000
Description
If VBUS.VALUE value drops below VBUS.UVWTHRESH, then a warning is generated.
Related Topics
7.2 Regeneration
AKD User Guide | VBUS Parameters
Kollmorgen | December 2010 619

Kollmorgen AKD series Specifications

General

Continuous Current	Up to 180 A
Control Modes	Position, Velocity, Torque
Communication Interfaces	EtherCAT, CANopen, Modbus TCP/IP
Feedback Options	Resolver, Encoder
Safety Features	Safe Torque Off (STO), Safe Stop 1 (SS1)
Protection Features	Overvoltage, Undervoltage, Overcurrent, Short Circuit, Overtemperature
Switching Frequency	8 kHz, 16 kHz
Ambient Temperature	0°C to 40°C
Operating Temperature	0 - 40 °C (derating may apply)
Humidity	5% to 95% non-condensing