AKD User Guide | PL Parameters
PL.FBSOURCE
General Information
Type NV Parameter
Description Sets the feedback source for the position loop.
Units N/A
Range 0 to 1
Default Value 0
Data Type Boolean
See Also VL.FBSOURCE
Start Version M_01-00-00-000
Fieldbus Index/Subindex Object Start Version
Modbus 592 M_01-03-00-000
Description
This parameter determines the feedback source to be used by the position loop. A value of 0 selects the primary
feedback, 1 selects the secondary feedback.
Related Topics
11.5 Position Loop
544 Kollmorgen | December 2010
To Next Page
Loading...
