Siemens SINAMICS G150 - Page 1094

3 Function diagrams 3.5 PROFIdrive
SINAMICS G130/G150
1094 List Manual (LH2), 04/2014, A5E03263479A
Fig. 3-56 2500 – E_DIGITAL_1 interconnection
- 2500 -
Function diagram
87654321
fp_2500_54_eng.vsd
DO: CU_G, CU_S
S120/S150/G130/G150
27.06.13 V04.07.00
PROFIdrive - E_DIGITAL_1 interconnection
Signal targets for E_DIGITAL_1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
Inverted
[Function diagram]
signal target
-
-
-
-
-
-
-
E_DIGITAL_1.1
E_DIGITAL_1.2
E_DIGITAL_1.3
E_DIGITAL_1.4
E_DIGITAL_1.5
E_DIGITAL_1.6
E_DIGITAL_1.8
E_DIGITAL_1.9
E_DIGITAL_1.11
E_DIGITAL_1.12
E_DIGITAL_1.13
E_DIGITAL_1.14
E_DIGITAL_1.15
E_DIGITAL_1.7
E_DIGITAL_1.10
E_DIGITAL_1.0
Signal
<3> Pre-assignment, can be freely changed.
Reserved
Reserved
Digital input 18 (DI 18)
Digital input 20 (DI 20)
Reserved
Reserved
Reserved
Reserved
Reserved
Digital input 17 (DI 17)
Digital input 19 (DI 19)
Digital input 21 (DI 21)
Digital input 22 (DI 22)
Reserved
Reserved
Meaning
Digital input 16 (DI 16)
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
[Function diagram]
Internal status word
-
<3>
Interconnection
parameters
-
-
-
-
-
-
-
-
<1> Used in telegrams 393 to 396.
<1>
PROFIdrive sampling time
<2> Not for CU320-2.
p2083[8] = r0722.16
p2083[9] = r0722.17
p2083[11] = r0722.19
p2083[13] = r0722.21
p2083[14] = r0722.22
-
p2083[10] = r0722.18
p2083[12] = r0722.20
<2>
<2>
<2>