Siemens SINAMICS G150 - Trace 1 Trace Buffer Signal 6; Trace 1 Tr Sig 6; Trace 1 Trace Buffer Signal 7; Trace 1 Tr Sig 7; Trace Physical Address Signal 0; Trace Phyaddr Sig0; Trace Physical Address Signal 1; Trace Phyaddr Sig1

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
671
2 Parameters
2.2 List of parameters
Description: Displays the trace buffer (record buffer) for trace 1 and signal 6.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 7.
Dependency: Refer to: r4760
Description: Sets the physical address for the first signal to be traced.
The data type is defined using p4730.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the second signal to be traced.
The data type is defined using p4731.
Index: [0] = Trace 0
[1] = Trace 1
r4776[0...16383] Trace 1 trace buffer signal 6 / Trace 1 tr sig 6
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4777[0...16383] Trace 1 trace buffer signal 7 / Trace 1 tr sig 7
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4780[0...1] Trace physical address signal 0 / Trace PhyAddr Sig0
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4781[0...1] Trace physical address signal 1 / Trace PhyAddr Sig1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin