Siemens SINAMICS G150 - Trace 1 Trace Buffer Signal 1; Trace 1 Tr Sig 1; Trace 1 Trace Buffer Signal 2; Trace 1 Tr Sig 2; Trace 1 Trace Buffer Signal 3; Trace 1 Tr Sig 3; Trace 1 Trace Buffer Signal 4; Trace 1 Tr Sig 4

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
670 List Manual (LH2), 04/2014, A5E03263479A
Description: Displays the trace buffer (record buffer) for trace 1 and signal 1.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 2.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 3.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 4.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 5.
Dependency: Refer to: r4760
r4771[0...16383] Trace 1 trace buffer signal 1 / Trace 1 tr sig 1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4772[0...16383] Trace 1 trace buffer signal 2 / Trace 1 tr sig 2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4773[0...16383] Trace 1 trace buffer signal 3 / Trace 1 tr sig 3
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4774[0...16383] Trace 1 trace buffer signal 4 / Trace 1 tr sig 4
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4775[0...16383] Trace 1 trace buffer signal 5 / Trace 1 tr sig 5
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -