Siemens SINAMICS G150 - Trace Physical Address Signal 2; Trace Phyaddr Sig2; Trace Physical Address Signal 3; Trace Phyaddr Sig3; Trace Physical Address Signal 4; Trace Phyaddr Sig4; Trace Physical Address Signal 5; Trace Phyaddr Sig5

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
672 List Manual (LH2), 04/2014, A5E03263479A
Description: Sets the physical address for the third signal to be traced.
The data type is defined using p4732.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the fourth signal to be traced.
The data type is defined using p4733.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the fifth signal to be traced.
The data type is defined using p4734.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the sixth signal to be traced.
The data type is defined using p4735.
Index: [0] = Trace 0
[1] = Trace 1
p4782[0...1] Trace physical address signal 2 / Trace PhyAddr Sig2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4783[0...1] Trace physical address signal 3 / Trace PhyAddr Sig3
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4784[0...1] Trace physical address signal 4 / Trace PhyAddr Sig4
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4785[0...1] Trace physical address signal 5 / Trace PhyAddr Sig5
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin