SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
749
2 Parameters
2.2 List of parameters
Dependency: Refer to: p8501
Description: Display and connector output for the signal interconnected via connector input p8502.
Dependency: Refer to: p8502
Description: Display and connector output for the signal interconnected via connector input p8503.
Dependency: Refer to: p8503
Description: Display and connector output for the signal interconnected via connector input p8504.
Dependency: Refer to: p8504
Bit field: Bit Signal name 1 signal 0 signal FP
00 From BI: p8501[0] ON OFF -
01 From BI: p8501[1] ON OFF -
02 From BI: p8501[2] ON OFF -
03 From BI: p8501[3] ON OFF -
04 From BI: p8501[4] ON OFF -
05 From BI: p8501[5] ON OFF -
06 From BI: p8501[6] ON OFF -
07 From BI: p8501[7] ON OFF -
08 From BI: p8501[8] ON OFF -
09 From BI: p8501[9] ON OFF -
10 From BI: p8501[10] ON OFF -
11 From BI: p8501[11] ON OFF -
12 From BI: p8501[12] ON OFF -
13 From BI: p8501[13] ON OFF -
14 From BI: p8501[14] ON OFF -
15 From BI: p8501[15] ON OFF -
16 From BI: p8501[16] ON OFF -
17 From BI: p8501[17] ON OFF -
18 From BI: p8501[18] ON OFF -
19 From BI: p8501[19] ON OFF -
20 From BI: p8501[20] ON OFF -
21 From BI: p8501[21] ON OFF -
r8512 CO: Output signal wordwise 0 / Outp_sig word 0
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r8513 CO: Output signal wordwise 1 / Outp_sig word 1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
r8514 CO: Output signal wordwise 2 / Outp_sig word 2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 2
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 2195
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: PERCENT Expert list: 1
Min Max Factory setting
- [%] - [%] - [%]
To Next Page
Loading...
