Siemens SINAMICS G150 - Data in the Drive Object (Function Module) Field

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
19
2 Parameters
2.1 Overview of parameters
A parameter can belong to a single, multiple, or all drive objects.
The following information relating to "Drive object" and "Function module" can be displayed
under the parameter number:
Table 2-1 Data in the "Drive object (function module)" field
Drive object (function
module)
Type Meaning
All objects - This parameter is used by all drive objects.
B_INF 30 Basic Infeed closed loop control
Unregulated line infeed unit (without regenerative feedback) for rectifying the line
voltage of the DC link.
B_INF (parallel) - Basic Infeed with "Parallel connection" function module (r0108.15).
B_INF (Brk Mod Ext) - Basic Infeed with "Braking Module external" function module (r0108.26).
B_INF (Cooling unit) - Basic Infeed with "Cooling unit" function module (r0108.28)
B_INF (PROFINET) - Basic Infeed with "PROFINET" function module (r0108.31).
CU_G130_DP Control Unit SINAMICS G130 with PROFIBUS interface.
CU_G130_DP (CAN) - Control Unit SINAMICS G130 with PROFIBUS interface and function module “CAN“
(p0108.29).
CU_G130_DP
(COMM BOARD)
Control Unit SINAMICS G130 with PROFIBUS interface and "COMM board" function
module (p0108.30 ).
CU_G130_DP
(PROFINET)
- Control Unit SINAMICS G130 with PROFIBUS interface and function module
“PROFINET“ (p0108.31).
CU_G130_PN Control Unit SINAMICS G130 with PROFINET interface.
CU_G130_PN (CAN) - Control Unit SINAMICS G130 with PROFINET interface and function module “CAN“
(p0108.29).
CU_G130_PN
(COMM BOARD)
Control Unit SINAMICS G130 with PROFINET interface and "COMM board" function
module (p0108.30 ).
CU_G130_PN
(PROFINET)
Control Unit SINAMICS G130 with PROFINET interface and function module
“PROFINET“ (p0108.31).
CU_G150_DP Control Unit SINAMICS G150 with PROFIBUS interface.
CU_G150_DP (CAN) - Control Unit SINAMICS G150 with PROFIBUS interface and function module “CAN“
(p0108.29).
CU_G150_DP
(COMM BOARD)
Control Unit SINAMICS G150 with PROFIBUS interface and "COMM board" function
module (p0108.30 ).
CU_G150_DP
(PROFINET)
- Control Unit SINAMICS G150 with PROFIBUS interface and function module
“PROFINET“ (p0108.31).
CU_G150_PN Control Unit SINAMICS G150 with PROFINET interface.
CU_G150_PN (CAN) - Control Unit SINAMICS G150 with PROFINET interface and function module “CAN“
(p0108.29).
CU_G150_PN
(COMM BOARD)
Control Unit SINAMICS G150 with PROFINET interface and "COMM board" function
module (p0108.30 ).
CU_G150_PN
(PROFINET)
Control Unit SINAMICS G150 with PROFINET interface and function module
“PROFINET“ (p0108.31).
ENC 300 Object for a DRIVE-CLiQ encoder.