Siemens SINAMICS G150 - Trace Average in the Time Range; Trace Average; Trace Data Type 1 Traced; Trace Rec Type 1; Trace Data Type 2 Traced; Trace Rec Type 2; Trace Data Type 3 Traced; Trace Rec Type 3

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
661
2 Parameters
2.2 List of parameters
Description: Sets the averaging in the time range for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 1 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 2 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 3 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 4 for the trace.
p4724[0...1] Trace average in the time range / Trace average
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned8 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 0001 bin 0000 bin
r4725[0...1] Trace data type 1 traced / Trace rec type 1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4726[0...1] Trace data type 2 traced / Trace rec type 2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4727[0...1] Trace data type 3 traced / Trace rec type 3
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4728[0...1] Trace data type 4 traced / Trace rec type 4
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -