Siemens SINAMICS G150 - Encoder Serial Number Part 2; Enc Ser_No 2; Encoder Serial Number Part 3; Enc Ser_No 3

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
181
2 Parameters
2.2 List of parameters
Description: Displays the actual serial number part 2 of the appropriate encoder.
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0462, r0463, r0464
Description: Displays the actual serial number part 2 of the appropriate encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0462, r0463, r0464
Description: Displays the actual serial number part 3 of the appropriate encoder.
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0461, r0463, r0464
Description: Displays the actual serial number part 3 of the appropriate encoder.
Index: [0] = Encoder 1
[1] = Encoder 2
[2] = Encoder 3
Dependency: Refer to: p0441, p0442, p0443, p0444, p0445, r0460, r0461, r0463, r0464
r0461 Encoder serial number part 2 / Enc ser_no 2
ENC Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r0461[0...2] Encoder serial number part 2 / Enc ser_no 2
VECTOR_G Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r0462 Encoder serial number part 3 / Enc ser_no 3
ENC Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r0462[0...2] Encoder serial number part 3 / Enc ser_no 3
VECTOR_G Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Encoder Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -