SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
697
2 Parameters
2.2 List of parameters
Description: Displays the values calculated for the recorder
Index: [0] = Actual trace number
[1] = Actual trace duration
[2] = Actual pretrigger time
[3] = Actual post trigger time
[4] = Actual number of signals
Dependency: Refer to: p6999
Description: Displays the status word of the recorder.
Dependency: Refer to: p6993, p6994, r6997, p6998, p6999
Description: Sets the bit mask for trigger signal 2 (p6994) of the recorder.
Trigger 2.1 is formed by ANDing the signal source in p6994[0] and the bit mask in p6993[0].
Trigger 2.2 is formed by ANDing the signal source in p6994[1] and the bit mask in p6993[1].
Trigger 2.3 is formed by ANDing the signal source in p6994[2] and the bit mask in p6993[2].
Index: [0] = Trigger 2.1
[1] = Trigger 2.2
[2] = Trigger 2.3
Dependency: Refer to: p6994
r6991[0...4] Recorder settings display / Rec setting displ
B_INF (Recorder),
VECTOR_G
(Recorder)
Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
r6992.0...14 CO/BO: Recorder status word / Rec ZSW
B_INF (Recorder),
VECTOR_G
(Recorder)
Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: 8144
P-Group: Displays, signals Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
- - -
Bit field: Bit Signal name 1 signal 0 signal FP
00 Internal activation Set Not set -
01 External activation Set Not set -
02 Internal trigger Set Not set -
03 External trigger 1.1 Set Not set -
04 External trigger 1.2 Set Not set -
05 External trigger 1.3 Set Not set -
06 External trigger 1.4 Set Not set -
07 External trigger 2.1 Set Not set -
08 External trigger 2.2 Set Not set -
09 External trigger 2.3 Set Not set -
10 Hardware trigger Set Not set -
11 Data buffering running Yes No -
12 Post trigger time running Yes No -
13 Data being stored Yes No -
14 Data buffer full Yes No -
p6993[0...2] Recorder trigger 2 bit mask / Rec trig 2 mask
B_INF (Recorder),
VECTOR_G
(Recorder)
Can be changed: U, T Calculated: - Access level: 4
Data type: Unsigned32 Dyn. index: - Func. diagram: 8144
P-Group: - Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0000 hex FFFF FFFF hex 0001 hex
To Next Page
Loading...
