Siemens SINAMICS G150 - Current Model Controller Output; I_Mod_Ctrl Outp; Current Model Magnetizing Current D Axis; I_Mod I_Mag D-Ax; Current Model Magnetizing Current Q Axis; I_Mod I_Mag Q-Ax; CO: Current Model Isq after Actual Value Tracking; I_Mod Isq Track

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
403
2 Parameters
2.2 List of parameters
Description: Displays the output of the current model controller.
Description: Displays the magnetizing current of the current model in the d-axis.
Description: Displays the magnetizing current of the current model in the q-axis.
Description: Displays the stator current in the q axis after the current actual value tracking.
Description: Sets the signal source for the excitation current actual value
r1636 Current model controller output / I_mod_ctrl outp
VECTOR_G (n/M) Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 6727
P-Group: Closed-loop control Units group: 6_2 Unit selection: p0505
Not for motor type: ASM, PEM, REL Scaling: p2002 Expert list: 1
Min Max Factory setting
- [Arms] - [Arms] - [Arms]
r1637 Current model magnetizing current d axis / I_mod I_mag d-ax
VECTOR_G (n/M) Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 6727
P-Group: Closed-loop control Units group: 6_2 Unit selection: p0505
Not for motor type: ASM, PEM, REL Scaling: p2002 Expert list: 1
Min Max Factory setting
- [Arms] - [Arms] - [Arms]
r1638 Current model magnetizing current q axis / I_mod I_mag q-ax
VECTOR_G (n/M) Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 6727
P-Group: Closed-loop control Units group: 6_2 Unit selection: p0505
Not for motor type: ASM, PEM, REL Scaling: p2002 Expert list: 1
Min Max Factory setting
- [Arms] - [Arms] - [Arms]
r1639 CO: Current model Isq after actual value tracking / I_mod Isq track
VECTOR_G (n/M) Can be changed: - Calculated: - Access level: 4
Data type: FloatingPoint32 Dyn. index: - Func. diagram: 6727
P-Group: Closed-loop control Units group: 6_2 Unit selection: p0505
Not for motor type: ASM, PEM, REL Scaling: p2002 Expert list: 1
Min Max Factory setting
- [Arms] - [Arms] - [Arms]
p1640[0...n] CI: Excitation current actual value signal source / I_exc_ActVal S_src
VECTOR_G (n/M) Can be changed: T Calculated: - Access level: 3
Data type: Unsigned32 / FloatingPoint32 Dyn. index: CDS, p0170 Func. diagram: 6727
P-Group: Closed-loop control Units group: - Unit selection: -
Not for motor type: ASM, PEM, REL Scaling: PERCENT Expert list: 1
Min Max Factory setting
- - 0