Siemens SINAMICS G150 - Trace 0 Trace Buffer Signal 4; Trace 0 Tr Sig 4; Trace 0 Trace Buffer Signal 5; Trace 0 Tr Sig 5; Trace 0 Trace Buffer Signal 6; Trace 0 Tr Sig 6; Trace 0 Trace Buffer Signal 7; Trace 0 Tr Sig 7

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
669
2 Parameters
2.2 List of parameters
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 0 and signal 4.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 0 and signal 5.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 0 and signal 6.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 0 and signal 7.
Dependency: Refer to: r4760
Description: Displays the trace buffer (record buffer) for trace 1 and signal 0.
Dependency: Refer to: r4760
r4764[0...16383] Trace 0 trace buffer signal 4 / Trace 0 tr sig 4
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4765[0...16383] Trace 0 trace buffer signal 5 / Trace 0 tr sig 5
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4766[0...16383] Trace 0 trace buffer signal 6 / Trace 0 tr sig 6
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4767[0...16383] Trace 0 trace buffer signal 7 / Trace 0 tr sig 7
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4770[0...16383] Trace 1 trace buffer signal 0 / Trace 1 trace sig0
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -