Siemens SINAMICS G150 - Trace Physical Address Signal 6; Trace Phyaddr Sig6; Trace Physical Address Signal 7; Trace Phyaddr Sig7; Trace Physical Address Trigger Signal; Trace Phyaddr Trig; Trace Data Type 5 Traced; Trace Rec Type 5

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
673
2 Parameters
2.2 List of parameters
Description: Sets the physical address for the seventh signal to be traced.
The data type is defined using p4736.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the eighth signal to be traced.
The data type is defined using p4737.
Index: [0] = Trace 0
[1] = Trace 1
Description: Sets the physical address for the trigger signal.
The data type is defined by making the appropriate selection in p4711.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 5 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
p4786[0...1] Trace physical address signal 6 / Trace PhyAddr Sig6
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4787[0...1] Trace physical address signal 7 / Trace PhyAddr Sig7
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 bin 1111 1111 1111 1111 1111 1111
1111 1111 bin
0000 bin
p4789[0...1] Trace physical address trigger signal / Trace PhyAddr Trig
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0000 hex FFFF FFFF hex 0000 hex
r4790[0...1] Trace data type 5 traced / Trace rec type 5
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -