Siemens SINAMICS G150 - Mtrace Cycle Actual Display; Cycle Act Display; Mtrace Ring Buffer Files Number; Ring Buff File Qty; OA DO-Specific Number; OA DO Qty; OA DO-Specific Identifier Total Length; OA DO ID Tot_Lgth

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
683
2 Parameters
2.2 List of parameters
Description: Displays the currently running cycle (including deadtime) of the multiple trace.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Refer to: p4840, p4844
Description: Sets the number of ring buffer files for the measurement results of the multiple trace.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Refer to: p4840, r4841
Description: Displays the number of OA applications installed on this drive object.
Dependency: Refer to: r4951, r4952, r4955, p4956, r4957, r4958, r4959, r4960
Note: DO: Drive Object
OA: Open Architecture (OA application)
Description: Displays the total length of the identifiers of the OA applications installed on this drive object.
Dependency: Refer to: r4950, r4952, r4955, p4956, r4957, r4958, r4959, r4960
Note: The identifier of an OA application comprises a maximum of 8 characters plus separator.
r4841[0...1] MTrace cycle actual display / Cycle act display
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4844[0...1] MTrace ring buffer files number / Ring buff file qty
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: T Calculated: - Access level: 3
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
10 10 10
r4950 OA DO-specific number / OA DO qty
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 16 -
r4951 OA DO-specific identifier total length / OA DO id tot_lgth
All objects Can be changed: - Calculated: - Access level: 4
Data type: Unsigned16 Dyn. index: - Func. diagram: -
P-Group: OEM range Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 1
Min Max Factory setting
0 144 -