Siemens SINAMICS G150 - Trace Data Type 6 Traced; Trace Rec Type 6; Trace Data Type 7 Traced; Trace Rec Type 7; Trace Data Type 8 Traced; Trace Rec Type 8; Trace Memory Bank Changeover; Trace Mem Changeov

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
674 List Manual (LH2), 04/2014, A5E03263479A
Description: Displays the recorded data type 6 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 7 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Displays the recorded data type 8 for the trace.
Index: [0] = Trace 0
[1] = Trace 1
Description: Changes over the memory bank to read out the contents of the trace buffer.
Dependency: Refer to: r4740, r4741, r4742, r4743, r4750, r4751, r4752, r4753
Description: Displays the instant in time for fulfilling the trigger condition for trace recorder 0.
The time comprises milliseconds (index 0) and days (index 1).
r4791[0...1] Trace data type 6 traced / Trace rec type 6
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4792[0...1] Trace data type 7 traced / Trace rec type 7
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4793[0...1] Trace data type 8 traced / Trace rec type 8
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
p4795 Trace memory bank changeover / Trace mem changeov
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 500 0
r4797[0...1] Trace 0 trigger instant / Trace 0 t_trigger
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -