Siemens SINAMICS G150 - Trace 0 Trace Buffer Signal 6 Floating Point; Trace 0 Tr Sig 6; Trace 0 Trace Buffer Signal 7 Floating Point; Trace 0 Tr Sig 7; Trace 1 Trace Buffer Signal 0 Floating Point; Trace 1 Trace Sig0; Trace 1 Trace Buffer Signal 1 Floating Point; Trace 1 Tr Sig 1

2 Parameters
2.2 List of parameters
SINAMICS G130/G150
666 List Manual (LH2), 04/2014, A5E03263479A
Description: Displays the trace buffer (record buffer) for trace 0 and signal 6.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 0 and signal 7.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 1 and signal 0.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 1 and signal 1.
Dependency: Refer to: r4740, p4795
Description: Displays the trace buffer (record buffer) for trace 1 and signal 2.
Dependency: Refer to: r4740, p4795
r4746[0...16383] Trace 0 trace buffer signal 6 floating point / Trace 0 tr sig 6
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4747[0...16383] Trace 0 trace buffer signal 7 floating point / Trace 0 tr sig 7
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4750[0...16383] Trace 1 trace buffer signal 0 floating point / Trace 1 trace sig0
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4751[0...16383] Trace 1 trace buffer signal 1 floating point / Trace 1 tr sig 1
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -
r4752[0...16383] Trace 1 trace buffer signal 2 floating point / Trace 1 tr sig 2
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: FloatingPoint32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -