Siemens SINAMICS G150 - Trace Bit Mask Trigger, Bit Mask; Trace Trig Mask; Trace Bit Mask Trigger Trigger Condition; Trace Trig_Cond; Measuring Function Number of Averaging Operations; Meas Fct Avg Qty; Measuring Function Number of Stabilizing Periods; Measfct Stabperqty

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
659
2 Parameters
2.2 List of parameters
Dependency: Only effective when p4710 = 4, 5.
Description: Sets the bit mask for the bit mask trigger.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Only effective when p4710 = 6.
Description: Sets the trigger condition for bit mask trigger.
Index: [0] = Trace 0
[1] = Trace 1
Dependency: Only effective when p4710 = 6.
Description: Sets the number of averaging operations for the measuring function.
Description: Sets the number of stabilizing periods for the measuring function.
Description: Displays the trigger index in the trace buffer. The trigger event occurred at this point.
p4715[0...1] Trace bit mask trigger, bit mask / Trace trig mask
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 4294967295 0
p4716[0...1] Trace bit mask trigger trigger condition / Trace Trig_cond
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 4294967295 0
p4717 Measuring function number of averaging operations / Meas fct avg qty
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned8 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 255 0
p4718 Measuring function number of stabilizing periods / MeasFct StabPerQty
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: U, T Calculated: - Access level: 3
Data type: Unsigned8 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
0 255 0
r4719[0...1] Trace trigger index / Trace Trig_index
CU_G130_DP,
CU_G130_PN,
CU_G150_DP,
CU_G150_PN
Can be changed: - Calculated: - Access level: 3
Data type: Unsigned32 Dyn. index: - Func. diagram: -
P-Group: Trace and function generator Units group: - Unit selection: -
Not for motor type: - Scaling: - Expert list: 0
Min Max Factory setting
- - -