SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
25
2 Parameters
2.1 Overview of parameters
All the potential unit groups and possible unit selections are listed below.
Note
Detailed information on changing over units can be found in the following references:
References: /FH1/ SINAMICS S120 Function Manual Drive Functions
References: /BA3/ SINAMICS S150 Operating Instructions
Table 2-3 Unit groups (p0100)
Unit group Unit selection for p0100 = Reference variable for %
01
7_4 Nm lbf ft -
8_4 N lbf -
14_2 W HP -
14_6 kW HP -
14_13 W/A HP/A -
14_14 W min/1000 HP min/1000 -
14_15 W/A
2
HP/A
2
-
14_16 W min
2
/1000
2
HP min
2
/1000
2
-
25_1 kgm
2
lb ft
2
-
27_1 kg lb -
28_1 Nm/A lbf ft/A -
29_1 N/Arms lbf/Arms -
30_1 m ft -
47_1 kW s/K HP s/K -
48_1 W/K HP/K -
48_2 W min/1000 K HP min/1000 K -
48_3 W min
2
/1000
2
KHP min
2
/1000
2
K-
50_1 K/W K/HP -
Table 2-4 Unit groups (p0349)
Unit group Unit selection for p0349 = Reference variable for %
12
15_1 mH %
16_1 Ohm %
1000 p0304⋅
2 π 3 p0305 p0310⋅⋅⋅ ⋅
-----------------------------------------------------------------
p0304
3 p0305⋅
----------------------------
To Next Page
Loading...
