Siemens SINAMICS G150 - Page 31

SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
31
2 Parameters
2.1 Overview of parameters
1800 1899 Gating unit
1900 1999 Power unit and motor identification
2000 2009 Reference values
2010 2099 Communication (fieldbus)
2100 2139 Faults and alarms
2140 2199 Signals and monitoring
2200 2359 Technology controller
2360 2399 Staging, hibernation
2500 2699 Position control (LR) and basic positioning (EPOS)
2700 2719 Reference values, display
2720 2729 Load gearbox
2800 2819 Logic operations
2900 2930 Fixed values (e. g. percentage, torque)
3000 3099 Motor identification results
3100 3109 Real-time clock (RTC)
3110 3199 Faults and alarms
3200 3299 Signals and monitoring
3400 3659 Infeed closed-loop control
3660 3699 Voltage Sensing Module (VSM), Braking Module internal
3700 3779 Advanced Positioning Control (APC)
3780 3819 Synchronization
3820 3849 Friction characteristic
3850 3899 Functions (e. g. long stator)
3900 3999 Management
4000 4599 Terminal Board, Terminal Module (e. g. TB30, TM31)
4600 4699 Sensor Module
4700 4799 Trace
4800 4849 Function generator
4950 4999 OA application
5000 5169 Spindle diagnostics
5200 5230 Current setpoint filter 5 ... 10 (r0108.21)
5400 5499 System droop control (e. g. shaft generator)
5500 5599 Dynamic grid support (solar)
5600 5614 PROFIenergy
5900 6999 SINAMICS GM/SM/GL/SL
Table 2-7 Number ranges for SINAMICS, continued
Range Description
From To