PROGRAMMING CABLE TK503 / TK504
3 3ADR020159M0201, 1, en_US
1 Introduction and Basics
1.1 Intended Use
The TK503/TK504 programming cable can be used to operate and to configure the PLC via a
PC or laptop. For this, CODESYS software, driver and utility programs must be installed and a
TK503 or TK504 programming cable must be connected.
NOTICE!
The TK503/TK504 programming cable cannot be used for AC500 V3 Processor Mod-
ules.
1.2 PC System Requirements
– Platform: Microsoft Windows Vista, Windows 7, Windows 10
– CD-ROM drive
– USB port available for connecting the TK503/TK504 programming cable
NOTICE!
Microsoft, Windows and the Windows logo are trademarks of Microsoft Corporation
in the USA and/or other countries. All other product and company names are trade-
marks of their respective owners.
1.3 Content of the Installation Package
To Next Page
Loading...
