ABB AC500 PLC - Page 665

Name Value Internal
Value
Internal
value,
Type
Default Min. Max. EDS Slot
Index
Output
behaviour
com fault
Off
Last value
Substitute
Last value
5s
Substitute
5s
Last value
10s Sub-
stitute 10s
0
1
2
3
4
5
6
BYTE Off
0x00
0 1 0x0Y16
Substitute
value
0 0 WORD Default
0x0000
0 65536 0x0Y17
1
) With CS31 and addresses smaller than 70 and FBP, the value is increased by 1
2
) Not with FBP
3
) Value is hexadecimal: HighByte is slot (xx: 1...10), LowByte is index (1...n)
Table 94: Operating modes for counters 0 and 1, configuration table
Internal value Operating modes of counter
0 No counter / No PWM (default value)
1 1-1 UpDown counter (A)
2 2-1 UpDown with release input
3 3-2 UpDown counters (A, B)
4 4-2 UpDown (A, B on falling edges)
5 5-1 UpDown dynamic set (B) / rising edge
6 6-1 UpDown dynamic set (B) / falling edge
7 Not used
8 8-1 UpDown with release (B), 0 cross detection
9 - 19 Not used
20 11-1 Incremental encoder
21 12-2 Incremental encoder X2
22 13-1 Incremental encoder X4
30 14-1 SSI, absolute encoder
40 15-1 Time frequency meter
Device Specifications
Function Modules > S500
2019/04/17 3ADR010121, 13, en_US 665