Cisco ONS 15454 Series - NTP- A202 Customize the CTC Network View

10-3
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
Chapter 10 Change Node Settings
NTP-A202 Customize the CTC Network View
• DLP-A142 Modify a Static Route, page 18-17
• DLP-A143 Delete a Static Route, page 18-17
• DLP-A144 Disable OSPF, page 18-18
• DLP-A250 Set Up or Change Open Shortest Path First Protocol, page 19-34
• DLP-A382 Delete a Proxy Tunnel, page 20-64
• DLP-A383 Delete a Firewall Tunnel, page 20-65
• DLP-A434 Lock Node Security, page 21-12
• DLP-A435 Modify Backplane Port IP Settings, page 21-13
• DLP-A436 Disable Node Security Mode, page 21-14
Step 4 Complete the “NTP-A108 Back Up the Database” procedure on page 15-4.
Stop. You have completed this procedure.
NTP-A202 Customize the CTC Network View
Step 1 Complete the “DLP-A60 Log into CTC” task on page 17-66. If you are already logged in, continue with
Step 2.
Step 2 Complete the following tasks, as needed:
• DLP-A145 Change the Network View Background Color, page 18-18
• DLP-A528 Change the Default Network View Background Map, page 22-25
• DLP-A268 Apply a Custom Network View Background Map, page 19-52
• DLP-A148 Create Domain Icons, page 18-19
• DLP-A149 Manage Domain Icons, page 18-19
• DLP-A269 Enable Dialog Box Do-Not-Display Option, page 19-53
• DLP-A498 Switch Between TDM and DWDM Network Views, page 21-27
Stop. You have completed this procedure.
Purpose This procedure modifies the CTC network view, including grouping nodes
into domains for a less-cluttered display, changing the network view
background color, and using a custom image for the network view
background.
Tools/Equipment None
Prerequisite Procedures None
Required/As needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher