19-50
Cisco ONS 15454 Procedure Guide, R5.0
September 2005
Chapter 19 DLPs A200 to A299
DLP-A265 Change the Login Legal Disclaimer
• Click Hex Mode to display path trace in hexadecimal format. The button name changes to ASCII
Mode. Click it to return the path trace to ASCII format.
• Click the Reset button to reread values from the port.
• Click Default to return to the path trace default settings (Path Trace Mode is set to Off and the
New Transmit and New Expected Strings are null).
Caution Clicking Default will generate alarms if the port on the other end is provisioned with a different string.
The expect and receive strings are updated every few seconds if the Path Trace Mode field is set to Auto
or Manual.
Step 12 Click Close.
The detailed circuit window indicates path trace with an M (manual path trace) or an A (automatic path
trace) at the circuit source and destination ports.
Step 13 Return to your originating procedure (NTP).
DLP-A265 Change the Login Legal Disclaimer
Step 1 In node view, click the Provisioning > Security > Legal Disclaimer > HTML tabs.
Step 2 The existing statement is a default, non-customer-specific disclaimer. If you want to edit this statement
with specifics for your company, you can change the text. Use the HTML commands in Table 19-4 to
format the text as needed.
Purpose This task modifies the legal disclaimer statement shown in the CTC login
dialog box so that it displays customer-specific information when users log
into the network.
Tools/Equipment None
Prerequisite Procedures DLP-A60 Log into CTC, page 17-66
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
Table 19-4 HTML Tags for the Login Legal Disclaimer
Code Description
<b> Begins boldface font
</b> Ends boldface font
<center> Aligns type in the center of the window
</center> Ends the center alignment
<font=n>, where n = point size> Changes the font to the new size
</font> Ends the font size command
<p> Creates a line break
To Next Page
Loading...
