3-6
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
Chapter 3 Connect the PC and Log into the GUI
NTP-A23 Log into the ONS 15454 GUI
NTP-A23 Log into the ONS 15454 GUI
Step 1 Complete the “DLP-A60 Log into CTC” task on page 17-66.
Note For information about navigating in CTC, see Appendix A, “CTC Information and Shortcuts.”
Step 2 As needed, complete the “DLP-A61 Create Login Node Groups” task on page 17-69. Login node groups
allow you to manage nodes that are not connected to the login node through data communication
channels.
Step 3 As needed, complete the “DLP-A62 Add a Node to the Current Session or Login Group” task on
page 17-70.
Step 4 As needed, complete the “DLP-A339 Delete a Node from the Current Session or Login Group” task on
page 20-30.
Step 5 As needed, complete the “DLP-A372 Delete a Node from a Specified Login Node Group” task on
page 20-56.
Step 6 As needed, complete the “DLP-A327 Configure the CTC Alerts Dialog Box for Automatic Popup” task
on page 20-16.
Stop. You have completed this procedure.
Purpose This procedure logs into CTC, the graphical user interface software used to
manage the ONS 15454. This procedure includes optional node login tasks.
Tools/Equipment None
Prerequisite Procedures NTP-A260 Set Up Computer for CTC, page 3-1
One of the following procedures:
• NTP-A234 Set Up CTC Computer for Local Craft Connection to the
ONS 15454, page 3-2
• NTP-A235 Set Up a CTC Computer for a Corporate LAN Connection
to the ONS 15454, page 3-4
• NTP-A236 Set Up a Remote Access Connection to the ONS 15454,
page 3-5
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher
To Next Page
Loading...
Need help?
General
