Cisco ONS 15454 Series User Manual

18-52
Cisco ONS 15454 Procedure Guide, R5.0
March 2007
Chapter 18 DLPs A100 to A199
DLP-A171 Change Threshold Settings for OC-N Cards
ES Errored seconds Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
SES Severely errored seconds Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
SEFS Severely errored framing seconds Numeric. Can be set for 15-minute or
one-day intervals for Line, Section, or
Path (Near and Far End). Select the bullet
and click Refresh.
FC Failure count Numeric. Can be set for 15-minute or
one-day intervals for Line or Path (Near
and Far End). Select the bullet and click
Refresh.
UAS Unavailable seconds Numeric. Can be set for 15-minute or
one-day intervals for Line or Path (Near
and Far End). Select the bullet and click
Refresh.
PSC Protection Switching Count (Line) Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
PSD Protection Switch Duration (Line) Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
PSC-W Protection Switching Count - Working line
BLSR is not supported on the OC-3 card;
therefore, the PSC-W, PSC-S, and PSC-R
PM parameters do not increment.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
PSD-W Protection Switching Duration - Working
line
BLSR is not supported on the OC-3 card;
therefore, the PSD-W, PSD-S, and PSD-R
PM parameters do not increment.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
PSC-S Protection Switching Duration - Span
BLSR is not supported on the OC-3 card;
therefore, the PSC-W, PSC-S, and PSC-R
PM parameters do not increment.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
PSD-S Protection Switching Duration - Span
BLSR is not supported on the OC-3 card;
therefore, the PSD-W, PSD-S, and PSD-R
PM parameters do not increment.
Numeric. Can be set for 15-minute or
one-day intervals for Line (Near and Far
End). Select the bullet and click Refresh.
Table 18-22 OC-N Threshold Options (continued)
Parameter Description Options

Cisco ONS 15454 Series Specifications

General

Supported Interfaces	Ethernet
Management	Cisco Transport Controller (CTC), TL1, SNMP
Power Supply	-48 VDC or AC (depending on power supply module)
Operating Temperature	0 to 50°C (32 to 122°F) - varies by module
Storage Temperature	-40°C to 70°C (-40 to 158°F)
Relative Humidity	5 to 95%, noncondensing
Supported Protocols	SONET/SDH, Ethernet, OTN
Platform Type	Multi-service transport platform