Cisco ONS 15454 Series - DLP- A335 Delete Vlans

20-23
Cisco ONS 15454 Procedure Guide, R5.0
March 2005
Chapter 20 DLPs A300 to A399
DLP-A335 Delete VLANs
Step 2 Click the Provisioning > Overhead Circuits tabs.
Step 3 Click the overhead circuit that you want to delete: local or express orderwire, user data channel,
IP-encapsulated tunnel, or DCC tunnel.
Step 4 Click Delete.
Step 5 In the confirmation dialog box, click Yes to continue.
Step 6 Return to your originating procedure (NTP).
DLP-A335 Delete VLANs
Step 1 From the View menu, choose Go to Network View.
Step 2 From the Tools menu, choose Manage VLANS.
Step 3 In the All VLANs dialog box, click the VLAN that you want to remove.
Step 4 Click Delete.
Step 5 In the confirmation dialog box, click Yes .
Step 6 Return to your originating procedure (NTP).
DLP-A336 Repair an IP Tunnel
Step 1 Obtain the original IP address of the node in question.
Step 2 From the View menu, choose Go to Network View.
Purpose This task removes VLANs from a domain.
Tools/Equipment None
Prerequisite Procedures See Chapter 6, “Create Circuits and VT Tunnels” for circuit creation
procedures.
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Purpose This task repairs circuits that have an OOS-PARTIAL status as a result of
node IP address changes.
Tools/Equipment None
Prerequisite Procedures See Chapter 6, “Create Circuits and VT Tunnels” for circuit creation
procedures.
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher