EasyManuals Logo

Cisco ONS 15454 Series User Manual

Cisco ONS 15454 Series
850 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #479 background imageLoading...
Page #479 background image
17-69
Cisco ONS 15454 Procedure Guide, R5.0
March 2005
Chapter 17 DLPs A1 to A99
DLP-A61 Create Login Node Groups
If the login is successful, the CTC window appears. From here, you can navigate to other CTC views to
provision and manage the ONS 15454. If you need to turn up the shelf for the first time, see Chapter 4,
“Turn Up Node.” If login problems occur, refer to the Cisco ONS 15454 Troubleshooting Guide.
Step 6 Return to your originating procedure (NTP).
DLP-A61 Create Login Node Groups
Step 1 From the Edit menu in node view, choose Preferences.
Step 2 Click Login Node Group and Create Group.
Step 3 Enter a name for the group in the Create Login Group Name dialog box. Click OK.
Step 4 In the Members area, type the IP address (or node name) of a node you want to add to the group. Click
Add. Repeat this step for each node that you want to add to the group.
Note If the ONS 15454 that you want to add to the login node group has TCC2P cards installed and
the TCC2P secure mode option is enabled, enter the backplane LAN port IP address.
Step 5 Click OK.
The next time you log into an ONS 15454, the login node group will be available in the Additional Nodes
list of the Login dialog box. For example, in Figure 17-27, a login node group is created that contains
the IP addresses for Nodes 1, 4, and 5. During login, if you choose this group from the Additional Nodes
list and Disable Network Discovery is not selected, all nodes in the figure appear. If the login group and
Disable Network Discovery are both selected, Nodes 1, 4, and 5 appear. You can create as many login
groups as you need. The groups are stored in the CTC preferences file and are not visible to other users.
Purpose This task creates a login node group to display ONS 15454s that have an IP
connection but not a DCC connection to the login node.
Tools/Equipment None
Prerequisite Procedures DLP-A60 Log into CTC, page 17-66
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher

Table of Contents

Other manuals for Cisco ONS 15454 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ONS 15454 Series and is the answer not in the manual?

Cisco ONS 15454 Series Specifications

General IconGeneral
Supported InterfacesEthernet
ManagementCisco Transport Controller (CTC), TL1, SNMP
Power Supply-48 VDC or AC (depending on power supply module)
Operating Temperature0 to 50°C (32 to 122°F) - varies by module
Storage Temperature-40°C to 70°C (-40 to 158°F)
Relative Humidity5 to 95%, noncondensing
Supported ProtocolsSONET/SDH, Ethernet, OTN
Platform TypeMulti-service transport platform

Related product manuals