15-38
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
Chapter 15 Maintain the Node
NTP-A166 Export Network Element Defaults
NTP-A166 Export Network Element Defaults
Note The defaults currently displayed are exported whether or not they have been applied to the current node.
Note The NE defaults can also be exported from the File > Export menu. These exported defaults are for
reference only and cannot be imported.
Step 1 Complete the “DLP-A60 Log into CTC” task on page 17-66 at the node where you want to export NE
defaults.
Step 2 Click the Provisioning > Defaults Editor tabs.
Step 3 Click Export.
Step 4 Click Browse and browse to the location where you want to export the file if it does not appear in the
Export Defaults to File dialog box.
Step 5 Change the file name to something easy to remember (the file name has no extension).
Step 6 Click OK.
Stop. You have completed this procedure.
Purpose This procedure exports the NE defaults using the NE Defaults Editor. The
exported defaults can be imported to other nodes.
Tools/Equipment None
Prerequisite Procedures None
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Superuser
To Next Page
Loading...
Need help?
General
