EasyManuals Logo

Cisco ONS 15454 Series User Manual

Cisco ONS 15454 Series
850 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #827 background imageLoading...
Page #827 background image
A-13
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
Appendix A CTC Information and Shortcuts
Equipment Inventory
OOS-AUMA,MEA & UAS (Out-of-Service and Autonomous Management, Mismatched
Equipment and Unassigned)
OOS-AUMA,MT & SWDL (Out-of-Service and Autonomous Management, Maintenance and
Software Download)
OOS-AUMA,MT & UEQ (Out-of-Service and Autonomous Management, Maintenance and
Unequipped)
OOS-AUMA,UAS (Out-of-Service and Autonomous Management, Unassigned)
OOS-AUMA,UAS & UEQ (Out-of-Service and Autonomous Management, Unassigned and
Unequipped)
OOS-MA,MT (Out-of-Service and Management, Maintenance)
HW Part #—Displays the hardware part number; this number is printed on the top of the card or
equipment piece.
HW Rev—Displays the hardware revision number.
Serial #—Displays the equipment serial number; this number is unique to each card.
CLEI Code—Displays the Common Language Equipment Identifier code.
Firmware Rev—Displays the revision number of the software used by the application-specific
integrated circuit (ASIC) chip installed on the ONS 15454 card.
Product ID—Displays the manufacturing product identifier for a hardware component, such as a fan
tray, chassis, or card. The Product ID column displays “N/A” for equipment existing before
Software Release 4.6.
Version ID—Displays the manufacturing version identifier for a fan tray, chassis, or card. The
Version ID column displays “N/A” for equipment existing before Software Release 4.6.

Table of Contents

Other manuals for Cisco ONS 15454 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ONS 15454 Series and is the answer not in the manual?

Cisco ONS 15454 Series Specifications

General IconGeneral
Supported InterfacesEthernet
ManagementCisco Transport Controller (CTC), TL1, SNMP
Power Supply-48 VDC or AC (depending on power supply module)
Operating Temperature0 to 50°C (32 to 122°F) - varies by module
Storage Temperature-40°C to 70°C (-40 to 158°F)
Relative Humidity5 to 95%, noncondensing
Supported ProtocolsSONET/SDH, Ethernet, OTN
Platform TypeMulti-service transport platform

Related product manuals