Cisco ONS 15454 Series User Manual

Contents
xvii
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
DLP- A416 View Circuit Information 21-2
DLP- A417 View the BLSR Squelch Table 21-5
DLP- A418 Install Public-Key Security Certificate 21-6
DLP- A421 Provision G-Series Flow Control Watermarks 21-7
DLP- A422 Verify BLSR Extension Byte Mapping 21-8
DLP- A428 Install Fiber-Optic Cables in a 1+1 Configuration 21-8
DLP- A430 View Spanning Tree Information 21-9
DLP- A431 Change the JRE Version 21-10
DLP- A433 Enable Node Security Mode 21-11
DLP- A434 Lock Node Security 21-12
DLP- A435 Modify Backplane Port IP Settings 21-13
DLP- A436 Disable Node Security Mode 21-14
DLP- A437 Change a VCAT Member Service State 21-15
DLP- A438 Change General Port Settings for the FC_MR-4 Card 21-16
DLP- A439 Change Distance Extension Port Settings for the FC_MR-4 Card 21-18
DLP- A440 Change Enhanced FC/FICON Port Settings for the FC_MR-4 Card 21-19
DLP- A441 Install Electrical Cables on the UBIC-H EIAs 21-21
DLP- A442 Verify Pass-Through Circuits 21-23
DLP- A469 Install GBIC or SFP Connectors 21-24
DLP- A470 Remove GBIC or SFP Connectors 21-26
DLP- A498 Switch Between TDM and DWDM Network Views 21-27
CHAPTER 22 DLPs A500 to A599 22-1
DLP- A507 View OC-N PM Parameters 22-1
DLP- A510 Provision a DS-3 Circuit Source and Destination 22-3
DLP- A511 Change Node Access and PM Clearing Privilege 22-4
DLP- A515 Print CTC Data 22-5
DLP- A516 Export CTC Data 22-6
DLP- A517 View Alarm or Event History 22-8
DLP- A518 Create a New or Cloned Alarm Severity Profile 22-9
DLP- A519 Apply Alarm Profiles to Ports 22-12
DLP- A520 Delete Alarm Severity Profiles 22-14
DLP- A521 Modify Alarm, Condition, and History Filtering Parameters 22-16
DLP- A522 Suppress Alarm Reporting 22-17
DLP- A523 Discontinue Alarm Suppression 22-19
DLP- A524 Download an Alarm Severity Profile 22-20
DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards 22-21
DLP- A528 Change the Default Network View Background Map 22-25
DLP- A529 Delete Ethernet RMON Alarm Thresholds 22-26
DLP- A530 Install the Tie-Down Bar 22-27

Cisco ONS 15454 Series Specifications

General

Supported Interfaces	Ethernet
Management	Cisco Transport Controller (CTC), TL1, SNMP
Power Supply	-48 VDC or AC (depending on power supply module)
Operating Temperature	0 to 50°C (32 to 122°F) - varies by module
Storage Temperature	-40°C to 70°C (-40 to 158°F)
Relative Humidity	5 to 95%, noncondensing
Supported Protocols	SONET/SDH, Ethernet, OTN
Platform Type	Multi-service transport platform