Procedures
xxxii
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
NTP-A71 Create, Download, and Assign Alarm Severity Profiles 7-7
NTP-A168 Enable, Modify, or Disable Alarm Severity Filtering 7-8
NTP-A72 Suppress Alarms or Discontinue Alarm Suppression 7-8
NTP-A32 Provision External Alarms and Controls on the Alarm Interface Controller 7-9
NTP-A258 Provision External Alarms and Controls on the Alarm Interface Controller-International 7-11
NTP-A253 Change the PM Display 8-2
NTP-A122 Monitor Electrical Performance 8-3
NTP-A198 Monitor Ethernet Performance 8-5
NTP-A279 Create or Delete Ethernet RMON Thresholds 8-5
NTP-A250 Monitor OC-N Performance 8-6
NTP-A285 Monitor FC_MR-4 Performance 8-7
NTP-A289 Create or Delete FC_MR-4 RMON Thresholds 8-7
NTP-A199 Locate and View Circuits 9-2
NTP-A200 View Cross-Connect Card Resource Usage 9-2
NTP-A151 Modify and Delete Circuits 9-4
NTP-A278 Modify and Delete Overhead Circuits 9-4
NTP-A78 Create a Monitor Circuit 9-5
NTP-A79 Create a J1 Path Trace 9-6
NTP-A293 Create a J2 Path Trace 9-7
NTP-A298 Reconfigure Circuits 9-9
NTP-A301 Merge Circuits 9-10
NTP-A81 Change Node Management Information 10-2
NTP-A201 Change CTC Network Access 10-2
NTP-A202 Customize the CTC Network View 10-3
NTP-A203 Modify or Delete Card Protection Settings 10-4
NTP-A292 Modify or Delete Communications Channel Terminations and Provisionable Patchcords 10-4
NTP-A85 Change Node Timing 10-5
NTP-A205 Modify Users and Change Security 10-6
NTP-A87 Change SNMP Settings 10-6
NTP-A88 Modify Line Settings and PM Parameter Thresholds for Electrical Cards 11-2
NTP-A89 Modify Line Settings and PM Parameter Thresholds for OC-N Cards 11-2
NTP-A90 Modify Alarm Interface Controller Settings 11-3
NTP-A118 Modify Alarm Interface Controller-International Settings 11-4
NTP-A91 Upgrade DS-1 and DS-3 Protect Cards from 1:1 Protection to 1:N Protection 11-4
NTP-A315 Modify Port Settings and PM Parameter Thresholds for FC_MR-4 Cards 11-5
To Next Page
Loading...
