Tasks
xxxvii
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
DLP-A92 Four-Fiber BLSR Exercise Span Test 17-91
DLP-A93 Four-Fiber BLSR Span Switching Test 17-93
DLP-A94 Path Protection Switching Test 17-95
DLP-A95 Provision a DS-1 Circuit Source and Destination 17-96
DLP-A96 Provision a DS-1 or DS-3 Circuit Route 17-97
DLP-A97 Provision an OC-N Circuit Source and Destination 17-98
DLP-A99 Determine Available VLANs 17-99
DLP-A111 Changing the Maximum Number of Session Entries for Alarm History 18-1
DLP-A112 Display Alarms and Conditions Using Time Zone 18-3
DLP-A113 Synchronize Alarms 18-3
DLP-A114 View Conditions 18-4
DLP-A117 Apply Alarm Profiles to Cards and Nodes 18-5
DLP-A121 Enable/Disable Pointer Justification Count Performance Monitoring 18-7
DLP-A122 Enable/Disable Intermediate Path Performance Monitoring 18-9
DLP-A124 Refresh PM Counts at 15-Minute Intervals 18-11
DLP-A125 Refresh PM Counts at One-Day Intervals 18-11
DLP-A126 View Near-End PM Counts 18-12
DLP-A127 View Far-End PM Counts 18-13
DLP-A129 Reset Current PM Counts 18-13
DLP-A131 Search for Circuits 18-14
DLP-A137 Provision Path Trace on OC-N Ports 18-15
DLP-A140 Change the Node Name, Date, Time, and Contact Information 18-16
DLP-A142 Modify a Static Route 18-17
DLP-A143 Delete a Static Route 18-17
DLP-A144 Disable OSPF 18-18
DLP-A145 Change the Network View Background Color 18-18
DLP-A148 Create Domain Icons 18-19
DLP-A149 Manage Domain Icons 18-19
DLP-A150 Modify a 1:1 Protection Group 18-20
DLP-A152 Modify a 1:N Protection Group 18-21
DLP-A154 Modify a 1+1 Protection Group 18-22
DLP-A155 Delete a Protection Group 18-23
DLP-A156 Delete a Section DCC Termination 18-23
DLP-A157 Change the Node Timing Source 18-24
DLP-A158 Change User Password and Security Level on a Single Node 18-25
To Next Page
Loading...
