18-48
Cisco ONS 15454 Procedure Guide, R5.0
March 2007
Chapter 18 DLPs A100 to A199
DLP-A169 Change Line and Threshold Settings for the EC1-12 Card
Step 7 Return to your originating procedure (NTP).
Line (L) FC Failure count Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
UAS Unavailable seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Section (S) CV Coding violations Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh (Near End only).
ES Errored seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
SES Severely errored seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
SEFS Severely errored framing
seconds
Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Path (P) CV Coding violations Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh (Near and Far End).
ES Errored seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
FC Failure count Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
SES Severely errored seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
UAS Unavailable seconds Numeric. Can be set for 15-minute or
one-day intervals. Select the bullet and
click Refresh.
Table 18-20 SONET Threshold Options for the EC1-12 Card (continued)
SONET
Layer Parameter Description Options