Cisco ONS 15454 Series - Page 849

Index
IN-21
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
delete 20-23
users
change password or security settings
18-25, 18-26
create a user on a single node 17-82
create a user on multiple nodes 17-83
delete 18-26, 18-27
set up 4-4
V
VCAT circuits
add member
20-65
automatically routed 6-86
change member service state 21-15
change name 19-20
delete a member 20-69
edit a member name 19-20
manually routed 6-90
provision a circuit route 20-15
provision a J1 path trace 19-46
provision circuit source and destination 20-14
views
overview
A-1
change from one view to another A-2
network view shortcuts A-10
node view shortcuts A-10
see also network view
virtual link seeprovisionable patchcord
virtual link table (OSPF)
19-35
VLAN
create a VLAN for Ethernet circuits
6-62, 6-65, 6-67, 6-70
delete 20-23
provision ports for VLAN 19-14
verify VLAN availability 17-99
voltmeter 1-4, 17-22, 17-39
VT aggregation points 6-3
VT see circuits
VT tunnel
automatically-routed
6-29
description 6-3
manually-routed 6-31
provision route 19-13
W
WINS configuration 3-4, 17-56, 17-59, 17-61
wire
install alarm wires
17-22
install LAN wires 17-26
install timing wires 17-25
install TL1 craft interface wires 17-27
wire cutters 1-4
wire strippers 1-4
wire-wrap panel, external 1-16
wire wrappers 1-4
WTR (condition) 15-6
X
XC10G card
install
17-45
replace 15-21
slot compatibility 2-5
switch test 19-37
verify installation 4-2
XCVT card
install
17-45
replace 15-21
slot compatibility 2-3
switch test 19-37
upgrade to the XC10G card 12-2
verify installation 4-2
Y
Y cable protection
see also the Cisco ONS 15454 DWDM Installation and
Operations Guide