Contents
xii
Cisco ONS 15454 Procedure Guide, R5.0
December 2004
DLP- A96 Provision a DS-1 or DS-3 Circuit Route 17-97
DLP- A97 Provision an OC-N Circuit Source and Destination 17-98
DLP- A99 Determine Available VLANs 17-99
CHAPTER
18 DLPs A100 to A199 18-1
DLP- A111 Changing the Maximum Number of Session Entries for Alarm History 18-1
DLP- A112 Display Alarms and Conditions Using Time Zone 18-3
DLP- A113 Synchronize Alarms 18-3
DLP- A114 View Conditions 18-4
DLP- A117 Apply Alarm Profiles to Cards and Nodes 18-5
DLP- A121 Enable/Disable Pointer Justification Count Performance Monitoring 18-7
DLP- A122 Enable/Disable Intermediate Path Performance Monitoring 18-9
DLP- A124 Refresh PM Counts at 15-Minute Intervals 18-11
DLP- A125 Refresh PM Counts at One-Day Intervals 18-11
DLP- A126 View Near-End PM Counts 18-12
DLP- A127 View Far-End PM Counts 18-13
DLP- A129 Reset Current PM Counts 18-13
DLP- A131 Search for Circuits 18-14
DLP- A137 Provision Path Trace on OC-N Ports 18-15
DLP- A140 Change the Node Name, Date, Time, and Contact Information 18-16
DLP- A142 Modify a Static Route 18-17
DLP- A143 Delete a Static Route 18-17
DLP- A144 Disable OSPF 18-18
DLP- A145 Change the Network View Background Color 18-18
DLP- A148 Create Domain Icons 18-19
DLP- A149 Manage Domain Icons 18-19
DLP- A150 Modify a 1:1 Protection Group 18-20
DLP- A152 Modify a 1:N Protection Group 18-21
DLP- A154 Modify a 1+1 Protection Group 18-22
DLP- A155 Delete a Protection Group 18-23
DLP- A156 Delete a Section DCC Termination 18-23
DLP- A157 Change the Node Timing Source 18-24
DLP- A158 Change User Password and Security Level on a Single Node 18-25
DLP- A159 Delete a User from a Single Node 18-26
DLP- A160 Change User Password and Security Level on Multiple Nodes 18-26
DLP- A161 Delete a User from Multiple Nodes 18-27
DLP- A163 Delete SNMP Trap Destinations 18-28
DLP- A165 Change Line and Threshold Settings for the DS1-14 or DS1N-14 Cards 18-28
DLP- A166 Change Line and Threshold Settings for the DS3-12 or DS3N-12 Cards 18-32
DLP- A167 Change Line and Threshold Settings for the DS3-12E or DS3N-12E Cards 18-36